Plastic Moulding Die

Plastic Moulding Die

Plastic moulding die Plastic moulding die design process flow chart a, Figure 1. Whether the size is complete A. Detailed examination of the surface dimensions of each detail is marked. B. Can request the transmission of the manual file, measuring the size of the leaked label directly on the...

Send Inquiry

Product Details

Plastic moulding die

Tolerance±0.001mm
Roundness0.001mm
Concentricity0.002mm
Hardness54-60 HRC
Grinding Accuracy0.002mm
Discharge Accuracy±0.003mm
Grind Clear Anglemax=0.02
Discharge Anglemax=0.05
Grinding Finishra=0.13
Discharge Finishra=0.24-0.4
Wire Cutting Finish
ra=0.24-0.4


Plastic moulding die design process flow chart a, 


Figure 1. Whether the size is complete A. Detailed examination of the surface dimensions of each detail is marked. B. Can request the transmission of the manual file, measuring the size of the leaked label directly on the file, but still need to make the correction and signature of the manufacturer to reduce future disputes.


2. Open mold

A. Cavity number, mold base size, applicable to molding machine (Tie bar spacing, the maximum injection capacity).


B. Plastic raw material types, formability and the peripheral equipment required. Drying bucket, dehumidifier, mold temperature machine (Nylon series).


C. Mold Type: two or three plate model; Slider or not. With the exception of the 25 ° DIMM168 SMT type, no sliders are required.


D. Parting line, male and female side (finished view of the Top view or bottom view for the public). 


E. Top of the way: dial plus thimble. 


F. Dieren Machinability and mechanical strength: a. Whether the current processing capacity and accuracy of the mold design requirements. b. Finished product size design is too subtle, easily lead to lack of mold strength or sharp corners and easily damaged.


G. Reasonable tolerance: whether to have a lot of manufacturing capacity

Inquiry