Injection Molded Parts
Urethane samples in 3-4 weeks (1-10 parts can be molded per day) Injection molded samples in 6-8 weeks (100’s of parts can be molded per day) All lead times are dependent upon material, finish, part design and part size.Send Inquiry
Injection molded parts
Standard Lead Times
Urethane samples in 3-4 weeks (1-10 parts can be molded per day)
Injection molded samples in 6-8 weeks (100’s of parts can be molded per day)
All lead times are dependent upon material, finish, part design and part size.
Urethane tooling cost range from hundreds to thousands of dollars
Injection mold tooling costs range from a couple thousand to tens of thousands of dollars
Urethane tolerances are +/-.010” for the first inch, and +/-.005” for every inch afterwards.
Injection molding tolerances are +/.005” for the first inch, and +/-.002” for every inch afterwards.
Professional plastic mould manufacturer for more than 8 years
1.Quality control: Our defective products rate is 0.1%. Imported material 100%.
2.Reasonable price. Precision made. Experienced & responsible QC that you can reply on.
3.Each part would be given 100% test and tryout before shipment.
4.Adequate supply capacity. Punctual delivery time.
According to the type of molding equipment to carry on the mold, therefore must be familiar with all kinds of molding equipment performance, specifications, characteristics. For example, injection machine, specifications should be aware of the following: locking pressure, injection volume, injection pressure, mold installation size, ejection device and the maximum thickness of nozzle diameter and nozzle size, spherical radius, sprue locating ring and die parts and the minimum thickness, template travel,see the specific parameters.A preliminary estimate of the shape and size of the die to determine whether the mold can be installed and used on the selected injection machine.
Cavity layout. According to the geometric structure characteristics of the plastic parts, the size accuracy requirements, batch size, mold parts manufacturing is difficult, mold parts cost and so on, the number and arrangement of the type.